Adjusting Water Temperature

Before you arrive our team should have made sure the hot water was set. In the case that it was not and you are only getting cold water, here is how you can turn up the water temperature. 

1.) When you enter the garage from the laundry room, you will see the water heater on the left. Check the front gauge to see where the water temperature is set.

Below is an image of what the lowest setting looks like. 

2.) To increase the water temperate rotate the knob to the left (counter clockwise). We recomend setting the gauge to HOT A, or HOT B. 

Again, below is an image of what the ideal setting is for your max hot water temperature. Anything higher could be too hot. 

3.) In the case the setting is at the appropriate heat  but there is still no hot water, then the pilot light is out and will need to be re-lit.

Next to the water heater is an extra long ligther. Following the instructions posted under “Lighting Instructions” follow the step by step guide.